|Click on images for full-sized view|
OnlyLeft In Stock! Buy Now!
- Open Box Missing Non-Essentials products are in original manufacturer condition.
- Some or all of the non-essentials associated with the product may be missing.
- Non-essentials are defined as accessories that are not needed for the functionality of the product.
- Manuals and software might not be included, but can usually be downloaded from the manufacturer.
- These products carry the greater of the manufacturer or 90 Day Tech For Less warranty and they can be in the original manufacturer box or repackaged for protection during shipping.
• Missing non-essentials accessories
• Greater of the manufacturer or 90 Day Tech For Less warranty
15% Savings! Buy Now!
The Emulex LP10000 family of host bus adapters offers highly integrated 2Gb/s Fiber Channel to PCI/PCI-X connectivity solutions for enterprise-class storage area networks. The LP10000 HBAs deliver exceptional performance through the use of Thor, Emulex's sixth generation Fiber Channel controller. The Thor high performance controller is a dual channel device that combines ARM9 microprocessors, 1Gig/2Gig SERDES, and an advanced Fiber Channel protocol engine into a single module. The LP10000 family includes both single- and dual-channel HBAs, in a low-profile PCI card form factor that adapts to either standard height or low profile server slots. The robust features of Emulex's LightPulse HBAs provide the flexibility and broad interoperability needed for complex, highly scalable heterogeneous SANs. The LP10000 builds upon the Emulex software architecture, which enables the independence of an operating system's device driver from the underlying HBA platform. This exclusive HBA architecture is the foundation for proven reductions in the total cost of ownership of a SAN. Emulex's HBA architecture delivers low latency and high throughput in switched fabric and arbitrated loop topologies, and in clustered environments.
Emulex LightPulse LP10000DC-E Host Bus Adapter
Host Bus Adapter
2 x LC Fibre Channel
PCI-X 133 MHz, PCI-X 100 MHz, PCI-X 66 MHz
PCI 66 MHz 64-bit, PCI 33 MHz 32-bit
Arbitrated Loop, Switched Fabric
|Fibre Channel Class Support|
Class 3, Class 2
64+ Buffer-to-Buffer Credits supported (per channel)
50/125 Micron Multi-mode Fiber Fibre Channel, 62.5/125 Micron Multi-mode Fiber Fibre Channel
|Data Transfer Rate|
1.06 Gbps Fibre Channel, 2.12 Gbps Fibre Channel
984.25 feet 50/125 Micron Multi-mode Fiber at 2 Gbps, 492.13 feet 62.5/125 Micron Multi-mode Fiber at 2 Gbps
FC-FCP2, FC-FS, FC-PH, FC-PI, FC-FCP, FC-AL, FC-PLDA, FC-MI, FC-FLA, SCSI, TCP/IP
HBA Management Suite: HBAnyware
3.3V DC, 5V DC
9.1 Watts Typical at 66 MHz, 12.9 Watts Maximum at 66 MHz, 10.1 Watts Typical at 100 MHz, 14.4 Watts Maximum at 100 MHz, 10.1 Watts Typical at 133 MHz, 14.4 Watts Maximum at 133 MHz
Low-profile MD2 Hot-swappable
2.5 x 6.6 inches
Your satisfaction is guaranteed!
Join the over 1 million satisfied customers we've been serving since 2001. We inspect and test all of our products to ensure it meets the manufacturer quality standards. We have a 30 Day Return Policy and every product has at least a 90 Day Tech For Less Product Warranty against defects. If there does happen to be an issue, we will work with you to make it right!
1610 Garden of the Gods Rd.
Colorado Springs, CO 80907
Monday — Friday
9:00am to 6:00pm MT
8:00am to 6:00pm MT
After Sales Support
Jun 13th 2013
All trademarks and copyrights mentioned herein are the property of their respective owners.
©TechForLess, Inc. All Rights Reserved.