Tech for Less - Name Brand Computers & Electronics...Same Technology, Lower Prices

Contact Us

1610 Garden of the Gods Rd.
Colorado Springs, CO 80907

Sales: 1.866.880.1230

Operating Hours

Monday — Friday
Outlet Store:
9:00am to 4:00pm MT
Phone Inquiries:
9:00am to 4:00pm MT
Lumentum AT10XGC-J57 High Sensitivity 10Gb/s surface mount coplanar APD preamp receiver - LC/UPC Connector
Factory Sealed 2 Left
• Brand new
• Original manufacturer packaging
• Full manufacturer warranty

Now only: $114.49

General
Model Number

AT10XGC-J57

Product Name

Lumentum AT10XGC-J57 Optical Receiver

Product Type

Optical Receiver

Connector Type

LC/UPC

Features

High sensitivity, -28.5dBm typical
Low capacitance high speed InGaAs APD photodetector
Supports FEC rates up to 10.709Gb/s
Best in class power consumption, only 300mW
Designed to exceed the environmental requirements of Telcordia GR-468-CORE
RoHS 5/6 compliant

Applications

Client or line side links
300 pin LR transponder applications
Yellow fiber pigtail for MSA compliance

Operating Characteristics
Optical sensitivity BOL [1] [2]

Typ -28.5dBm, Max -27.0dBm

Sensitivity penalty EOL over temperature [1] [2]

Typ 0.75dB, Max 1.0dB

Deviation from linear phase

Min -10, Max +10

High frequency -3dB corner

Min 8GHz, Typ 9GHz

Low frequency -3dB corner

Max 40kHz

Transimpedance gain [3] [4] [5]

Min 2.3k, Typ 4.0k, Max 5.7k

Maximum output voltage [6]

Max 165mV

Return loss

Max -8dB

Optical overload [2]

Min -3dBm, Typ -1dBm

APD breakdown voltage

Min 20V, Max 40V

APD breakdown voltage temperature coefficient

Min 0.030V/C, Max 0.061V/C

Dark current

Max 100nA

Amplifier bias current

Typ 55mA, Max 73mA

Input current for output limiting

Typ 80uA

Transimpedance amp supply voltage

Typ 3.3V

Thermistor resistance

Typ 10k

[1]

Optical Wavelength between 1525-1575nm.

[2]

Measured with 9.95Gb/s, extinction ratio > 12dB, Q factor > 30, 50% crossing level, 1550nm.

[3]

Load impedance is 50AC-coupled.

[4]

Excludes APD responsivity.

[5]

Differential.

[6]

Single ended.

Absolute Maximum Ratings
Amplifier bias voltage

Min -0.7V, Max 5.0V

Operating temperature [1]

Min 0C, Max +85C

Storage temperature [2]

Min -40C, Max +85C

Input photocurrent [3]

Max 3mA

APD bias voltage

Min 0V, Max Vbr

Fiber bend radius

Min 20mm

[1]

The operating temperature is defined as the temperature of the module case.

[2]

The rating is referred to the ambient temperature.

[3]

VAPD VM3. Although implementation of a current limit is intuitive, it is not recommended as biasing below the specified M = 3 voltage in the presence of a high optical power has been shown to cause device damage.

Warranty
Warranty:

Manufacturer Warranty. For defective returns, Tech For Less will give you a full refund and will arrange for and pay all shipping costs.